About Scott Genius 940 2019
Any Trail, Any time. With the Genius 940, this phrase has never rung truer. With Scott’s TwinLoc Suspension System to always optimize your ride, a SRAM Eagle drivetrain and Syncros components, the 940 will get you up and down the mountain without breaking the bank.
Chain Guide: The integrated chain guide was developed in collaboration with the SCOTT SRAM MTB Racing Team. The idea behind was to create a reliable component that helps to avoid dropping chains but that was light, versatile and integrated in the design of the frame. The new chain guide weighs just 23 grams and is easy to assemble thanks to the smart assembly system and can accommodate chain rings from 30 to 36 teeth.
Genius Trail Geometry: The Genius has always been a bike designed to go up as well as it went down, and vice a versa. For 2018, Scott wanted to re-emphasize this point. They designed the Genius specifically in search of balance. Compared to the previous iteration, this one is slacker, has longer reach, shorter chainstays and a steeper seat angle. They really wanted geometry figures that would balance out the long front end for more stable descending. What they’ve ended up with is a bike that climbs like a bat out of hell and gets you down the mountain faster than you can say “dropping!” After years of testing different options, these numbers are a result of taking everything they want out of a bike for the trails they ride, and building it.
Virtual 4 Link Design: Scott’s suspension kinematic brings perfect balance and control to the platform. Using their Virtual Four Link design, they have honed their suspension feel, pedaling and braking response to work with maximum efficiency and in harmony with their TwinLoc Suspension System. Their kinematic suspension curve gives supple small bump sensitivity and therefore exceptional traction characteristics, perfect support in the mid-stroke and a controlled deep stroke for predictable and comfortable bottom outs. Specific pivot placements ensures efficient pedaling that drives the bike forwards like a startled greyhound and neutral braking that strikes a perfect balance between rider comfort and control, chassis stability and rear wheel traction. From the XC racer, to the downhill enthusiast, the kinematic brings improvements and advantages in all areas and gives a solid fundamental basis for a bike for all riders and all conditions.
One Frame Two Wheel Sizes: With Scott’s mountain bikes, they try to achieve ultimate versatility. These specific models can switch from 27.5″ to 29″ wheels with nothing more than the flip of a chip. No need to change the fork, all you need to do is flip a shock mount chip, change your wheels and off you go. The flip chip allows them to maintain a similar BB height when switching from one wheel size to the other which is key to keeping handling similar for both wheel sizes. With 27.5″ wheels, you can run either 2.5″, 2.6″ or 2.8″ tires. For the 29er, anywhere from 2.4″-2.6″ is good to go.
Trunnion Construction: Scott have adopted the new Metric shock sizing standards with a Trunnion mount. Since the shock body now extends between the two lower mounting bolts, Scott’s suspension partners have more design space. This means the shock has more stroke for the same eye to eye length. Stroke on the 165mm eye to eye shock has increased from 38mm to 40/45mm.The Trunnion standard also offers structural gains. The shorter shock enables them to build a very compact frame and shock package, which integrates tightly to the seat tube. They managed to have a very tiny yet stiff linkage-lighter than ever. Thanks to the Trunnion mount construction, stand over height is very low. They are still able to realize a super compact full suspension frame and provide the ability to mount both a small and big water bottle.
The Spark family maintains the 165mm eye-to-eye shock length of the previous Spark 900 (Scott’s shortest shock), but realises up to 7mm more shock stroke. All Spark RC and most Spark and Spark Plus bikes utilize the FOX Nude shock, specially made for SCOTT:
-165mm Metric Trunnion shock
-40mm (100mm travel RC Spark line-up) vs. 38mm (old Spark)
-45mm (120mm travel Spark line-up)
By turning the Trunnion shock upside-down, they can fully integrate it into the frame which results in several benefits. Since the Trunnion mount is the same width as the down tube and mainpivot, they can have a very clean frame design in this critical area. The lack of tight transitions and small details allows for an efficient, continuous carbon structure. Carbon material added to reinforce the shock mount also stiffens the connection between the down tube, main pivot and bottom bracket, a key stiffness path.
The flipped shock also lowers the frame’s center of gravity helping to give a more planted feel when riding. Unsprung mass is reduced since it is the lighter part of the shock, connected to the linkage, not the heavier body which must move during an impact – the suspension system can react faster. Scott’s TwinLoc remote cable can be routed cleanly into the down tube.
Twinloc Suspension System: With TwinLoc, a rider can effectively control the complete frame, fork, and shock as a system. Why does this matter? A bike with more suspension travel, correctly set up, has more sag than a bike with less travel. It’s that extra travel that makes it more fun to ride and more capable on the descents, but the greater sag has an oversized effect on the bike’s geometry and climbing performance. That’s where TwinLoc matters.
TwinLoc helps manage the sag effect in several ways. Whereas most systems only increase low-speed compression in an effort to gain pedaling efficiency, TwinLoc allows Scott to not only change compression damping, but also to change the spring curve, dynamically altering the geometry of the bike. In Trail mode, the shock is not only firmer, but it has dynamically less travel. The bike sits higher, maintains a steep seat angle for those climbs, and becomes more agile. They also offer a third, full lockout mode for going up in the most efficient manner possible.
These unique settings optimize climbing geometry, even on longer travel bikes. They can eliminate the “long travel effect” that can rob your pedaling efficiency, but they’re not robbing you of the full-fun, 100mm travel when you point it downhill. From a race setting, to a lunch ride, to an after work trail shred, being able to switch from mode to mode depending on a trails profile at the push of a lever is paramount to riding faster and having a damned good time.
Scott Sports was founded in 1958 by Ed Scott in Idaho, USA and operates its headquarters from Givisiez, Switzerland. They produce bicycle, wintersport, motorsport and running equipment. They are known for their innovative products which have been used used to win world championships and races at the highest level.
Frame: Genius Alloy SL 6011 custom butted / VLK Virtual 4 Link kinematic 27.5″ (2.6 & 2.8) and 29″ (2.4 & 2.6) tire compatible with Geo -BB adj. TBC Trunnion box construction / Boost 12x148mm
Fork: FOX 34 Float Performance Air Grip 3 / 3-Modes / 15x110mm QR axle / tapered steerer 44mm offset / Reb. Adj. / Lockout / 150mm travel
Rear Shock: FOX NUDE T EVOL Trunnion SCOTT custom w. travel / geo adj. 3 modes: Lockout-Traction Control-Descend custom large Airvolume / DPS / Reb. Adj. Travel 150-100-Lockout / 185X55mm
Remote System: SCOTT TwinLoc TSP Technology Suspension-Seatpost Remote below Bar / 3 modes / integ. Grip clamp
Headset: Syncros Pro Press Fit E2 / Tapered 1.5″-1 1/8″ OD 50/62mm / ID 44/56mm
Handlebar: Syncros FL2.0 mini Riser / Alloy 6061D.B. 12mm rise / 9° / 760mm Syncros Pro lock-on grips
Stem: Syncros FL2.0 / 6061 Alloy 6° / integrated Top Cup / 31.8mm / 1 1/8″
Seat Post: Syncros Dropper 2.0 / Remote 31.6mm / S size 100mm / M 125mm / L & XL 150mm
Saddle: Syncros Tofino 2.0 / CRMO rails
Shifters: SRAM NX Eagle Trigger
Rear Derailleur: SRAM GX / Eagle 12 Speed
Brakes: Shimano MT520 4 Piston Disc 203/F and 180/R mm SM-RT64 CL Rotor
Cassette: SRAM GX / XG1275 / 10-50 T
Chain: SRAM CN NX Eagle
Crankset: SRAM GX Eagle DUB Boost 32T
Bottom Bracket: SRAM DUB PF integrated / shell 41x92mm
Chainguide: SCOTT custom
Hubs: F: Formula CL811 / 15x110mm R: Formula CL14811 / Boost 12x148mm / XD
Spokes: Stainless Black 15G / 1.8mmM
Rims: Syncros X-30S / 32H / 30mm / Sleeve Joint Tubeless ready
Tyres: Maxxis Rekon / 29×2.6″ / 60TPI Kevlar Bead EXO / TR Tubeless ready
Extras: Syncros Trail Fender
Approx weight in KG: 14.30